Sizing and Pricing Guide
PLA Prints
This print pairing is 25cm tall at max on the larger figurine, and 13cm on the smaller figurine.
This print is approximately a 10 hour print with 80gr of Material (in separate components)
This Print (with no painting) would cost €45
With Painting, €60
This print is approximately 27cm tall
This print is approximately a 30 hour print with 200 gr of Material (in separate components)
This Print (with no painting) would cost €70
With Painting, €150 - (this is a very high detail paint job)
The Larger Print is approximately 55cm tall.
This print is approximately a 48 hour print with 350 gr of Material (in separate components)
This Print (with no painting) would cost €80
With Painting, €250 - (this is a very high detail paint job)
The Print on the left is approximately 55cm tall.
This print is approximately a 48 hour print with 400 gr of Material (in separate components, in this specific case, it is extremely complex.)
This Print (with no painting) would cost €90
With Painting, €270 - (this is a very high detail paint job)
PLA - (Polyactic Acid) is a basic 3D Printing Material, and is the easiest to print, however less resilient than PETG, and has low heat resistance. - it cannot be used in direct sunlight for extended periods of time (it will melt) - use this as an Indicative price guide. PETG Prints
PETG - (polyethylene terephthalate glycol) is a much tougher 3D Printing Material than PLA - It is harder to Print, but the end result is a easier to sand, and results in a much better finish after post-processing. This as an Indicative price guide. This print pairing is 25cm tall at max on the larger figurine, and 13cm on the smaller figurine.
This print is approximately a 10 hour print with 80gr of Material (in separate components)
This Print (with no painting) would cost €55
With Painting, €65
This print is approximately 27cm tall
This print is approximately a 30 hour print with 200 gr of Material (in separate components)
This Print (with no painting) would cost €80
With Painting, €160 - (this is a very high detail paint job)
The Larger Print is approximately 55cm tall.
This print is approximately a 35 hour print with 350 gr of Material (in separate components)
This Print (with no painting) would cost €90
With Painting, €260 - (this is a very high detail paint job)
The Print on the left is approximately 55cm tall.
This print is approximately a 48 hour print with 400 gr of Material (in separate components, in this specific case, it is extremely complex.)
This Print (with no painting) would cost €110
With Painting, €280 - (this is a very high detail paint job)
Important information:
The above information is strictly indicative, and every job must be quoted and estimated. - Costs vary with complexity, and the quantity of material with Printing time. Currently, I am printing on BAMBU LAB A1 Printers, of which I have a pair of 2.
Printing Options available include:
0.2mm Nozzle (Used for very fine, and small models, not for strength - This is also the slowest printing method.)
0.4mm Nozzle (Used for almost every other model type, and is very versatile)
To preserve Material quality, and reduce issues with Materials, I use exclusively Bambu Lab and Elegoo PLA and PETG.
Get In Touch
If you're interested in working with me, and would like more information, please feel free to get in touch.